Bevel Gear Assembly

Step 1

.Create 90 deg angle constraint between gears

 

 

Step 2

select plane definition from reference element toolbox then create a plane on pinion's addendum's center. 

 

Step 3

select plane definition from reference element toolbox then create a plane on main gear's diddendum's center. 

Step 5

.The bevel's cones should be coincidence by coincidence constraint

Step 5

The planes that have created in steps 2 and 3 should should be coincidence by coincidence constraint 

Comments   

0 #1 ALI REZAEI 2015-12-20 10:00
:-)

Add comment

Security code
Refresh

top